Set-up
32
• Cable connection: Plug the supplied network cable into the
computer and Wi-Fi repeater.
4. Enter address http://192.168.10.1 in Browser to set up a
connection to the Wi-Fi repeater.
If it is not possible to activate the Wi-Fi repeater by entering
192.168.10.1 note the following information.
5. The window for connecting to the Wi-Fi repeater is open. Enter
the user name and password.
The default settings or settings after re-installation of the Wi-Fi
repeater are User name and Password “admin”. Please also read
section “Changing the password”.
To Next Page
Loading...