Magma ExpressBox 3T - Specifications; Pre-Installation Information; Parts List

Magma
ExpressBox 3T | Chapter 1 Introduction
8
Specifications
Item Description
Technology
PCI Express Bus Specification Revision 2.0
PCI Local Bus Specification Revision 2.3
PCI Bridge Architecture Revision 1.2
Backplane
(3) Full length PCI Express Slots
-two x8 PCIe 2.0
-one x4 PCIe 2.0
Thunderbolt™ 1, Interconnect Bandwidth 10Gbps (1.25 GB/s) Bi-directional
Thunderbolt™ 2, Interconnect Bandwidth
20Gbps (2.50 GB/s) Bi-directional
Enclosure
Aluminum Chassis
14.6”W x, 4.3”H x 7.9”H
(371mm x 110mm x 200mm)
EB3T: 6lbs (2.72kg) EB3T-DB: 7.65lbs (3.47kg)
System Cooling (1) Hot Swappable Fan
(1) Removable Blower Fan
Power Supply Options 250 Watt
100-240 VAC, 50-60 Hz Power Input
Two 4-pin auxiliary power tabs
Environmental
Ambient Temperature 0° to 50° C
Storage Temperature -20° to 60° C
Relative Humidity 5% to 85% non-condensing
MTBF 50,000
Regulatory Compliance FCC Class A Verified
CE
RoHS Compliant
Thunderbolt™ 1, Supported Operating Systems
MacOS 10.6.8 or higher
Thunderbolt™ 2, Supported Operating Systems
MacOS 10.9 or higher (not supported 10.8 below)
Warranty 30 day money back guarantee
1 year return to factory
Pre-Installation Information
Before using the Magma Expansion chassis you should perform the following steps:
• Inventory the shipping carton contents for all of the required parts
• Gather all of the necessary tools required for installation
• Read this manual
Parts List
Qty Item
1 ExpressBox 3T - Three Slot PCIe Expansion Chassis
1 Fan Blower
1 Carry Bag
1
U.S. Standard 115V Power Cord