1
Press [STANDBY-ON ] on the
remote control or the front panel
of the unit.
When you are playing a videotape,
turn the TV on and be sure to
select the input to which the unit is
connected.
Press:
2
Insert a prerecorded videotape.
Press [PLAY B] to begin
playback.
3
During playback, press
[PAUSE F].
Playback will pause and sound will
be muted.
4
Press [PLAY B] to resume play.
5
Press [STOP C] to stop
playback.
6
Press [STOP C / EJECT A] on
the front panel of the unit to
eject the videotape.
Recording and One-touch Timer Recording
Before recording, make sure:
•
The desired channel is selected by
pressing the Number buttons or
[CHANNEL
-
/ +]
on the remote
control or
[CHANNEL
L / K]
on
the front panel of the unit.
•
There is a videotape with a
record tab in the unit.
•
The desired recording mode is
selected in SP (standard play)
or SLP (super long play) mode
by pressing [REC MODE] on the
remote control.
Recording mode:
•
Stereo or SAP is selected. Refer
to page 21.
•
Refer to page 30 for instructions
on Timer Recording.
1
Press [VCR REC
I
] to begin the
recording.
To temporarily stop recording or
to resume it, press [PAUSE F].
After the unit has been in Pause
mode for 5 minutes, it will stop
automatically to protect the
videotape and the video head from
damage.
2
Press [STOP C] when the
recording is completed.
Note
• To view one channel while recording another
1) While you are recording on the unit, press
[VIDEO/TV].
2)
At the cable box or satellite box, select the channel you want to view.
If you have connected the unit to a cable box or satellite box, refer to
“Connection to a cable box or satellite box” section on page 15.
1
2
4
5
3
2
1
Tape speed
Type of tape
T160T120
Recording/Playback Time
T60
2-2/3hours2hours1hourSP mode
8hours6hours3hoursSLP mode
Accidental erasure prevention
To prevent accidental record-
ing on a recorded videotape,
remove its record tab. To
record on it later, cover the
hole with cellophane tape.
Playback
Note
• When a videotape without record tab is inserted, the unit will start
playback automatically.
• Tracking will be automatically adjusted upon playback. To adjust the
tracking manually, press [CHANNEL L / K] on the front panel of the
unit or [CHANNEL
-
/ +] on the remote control.
First:
To Next Page
Loading...
Need help?
General
