Fast forward:
When the unit is in stop mode, press [F.FWD D] to fast forward the videotape.
Rewind:
When the unit is in stop mode, press [REW E] to rewind the videotape.
To cue or review picture during playback (Picture Search):
Press [REW E], [F.FWD D] during playback.
Press it again and the unit will search in super high speed. (in the SLP mode only)
To freeze the picture on TV screen during playback (Still Mode):
Press [PAUSE F]. Each time you press the button, the picture will be
forwarded by one frame.
If the picture begins to vibrate vertically during the Still Mode,
stabilize the picture by pressing [CHANNEL L / K] on the front panel
or [CHANNEL
-
/ +] on the remote control.
If the picture is distorted or rolling vertically, adjust the vertical hold
control on your TV, if equipped.
Counter Reset:
Press [CLEAR/C-RESET].
To playback in slow motion:
Press [SLOW] during playback or the Still Mode.
If the noise bars appear on the TV screen, you can reduce it by
pressing [CHANNEL L / K] on the front panel or [CHANNEL
-
/ +] on the
remote control.
Automatic Rewind:
When a videotape is played or fast forwarded to its end, the videotape will
rewind to the beginning, stop and eject itself.
When you playback a videotape recorded in Hi-Fi stereo:
Press [AUDIO] on the remote control to select Hi-Fi or MONO for playback
sound mode.
• If you have connected a stereo TV to this unit, select “HIFI”.
• If you have connected a monaural TV to this unit, select “MONO”.
xxxx
VCR functions
Other operations
Note
• Still/Slow/Pause mode will be
automatically cancelled after
5 minutes to prevent damage
to the videotape and the
video head.
• To return to playback from
the Picture Search/Still/Slow
mode, press [PLAY B].
Search (cont’d)
Time search
Note
•
Index search and Timer search are not available during recording.
• Press [STOP C] to stop the search.
• If the end of the videotape is reached during Search, this unit will
cancel the search and rewind the videotape.
This feature allows you to go to a
specific point on a videotape by
entering the exact amount of time
you wish to skip in order to reach
the point.
First:
1
Press [SEARCH] repeatedly so
that the TIME SEARCH menu
appears.
2
Using the Number buttons,
enter your desired time to skip
within 30 seconds.
You can set the time up to 9:59.
3
Press [REW E], [F.FWD D] to
start time search.
If you want to go in the forward
direction, press
[F.FWD D]
.
If you want to go in the reverse
direction, press
[REW E]
.
After time search, the unit will play
the videotape automatically.
1
3
2
TIME SEARCH
2:50
To Next Page
Loading...
Need help?
General
