Magnavox MWC20T6 - SPECIAL PLAYBACK; SEARCH FUNCTION

COUNT 0:00:00
REPEAT PLAY B
- TV/VCR SETUP -
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
B USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
- TV/VCR SETUP -
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
B USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
–
USER’S SET UP
–
B RENTAL [ON]
REPEAT PLAY [OFF]
AUTO RETURN [OFF]
RENTAL PLAY B
16
EN
S
PECIAL PLAYBACK
–
USER’S SET UP
–
RENTAL [OFF]
B REPEAT PLAY [ALL]
AUTO RETURN [OFF]
RENTAL PLAYBACK
TV/VCRTV/VCR
AUTO REPEAT PLAYBACK
TV/VCRTV/VCR
This function allows you to repeat a tape
indefinitely.
1 Press [SET-UP].
Use
[
KK
/
LL
] to point to
"USER’S SET UP", then press
[ENTER].
2 Use [
KK
/
LL
] to point to "REPEAT PLAY".
Press
[ENTER] repeatedly
until your desired selection
"ALL" or "BLANK" appears.
• ALL: Repeat playback from the
beginning to the end of the tape.
• BLANK: Repeat playback from the beginning to a part,
which is blank for more than 10 seconds.
• OFF: Cancel repeat playback.
3 Press [SET-UP] to exit the menu.
4 Press [PLAY B] to start the
Repeat Play.
NOTES:
• If the rental mode is set to "ON", “RENTAL PLAY B”
display has priority.
• This setting will not change even if you turn off the
unit.
S
EARCH FUNCTION
ZERO RETURN
TV/VCRTV/VCR
This function allows you to search easily
a beginning point that you want to review
by rewinding or fast forwarding.
NOTE:
• Zero Return WILL NOT work on a blank tape or a blank
portion of a tape.
1 Rewind or forward the tape to the beginning
point at which you want to review.
2 Press [CLEAR] repeatedly to
set the counter to "0:00:00".
3 Press [PLAY B] for playback or [REC] for
recording.
Press
[STOP
CC
] when playback or recording is
completed.
4 Press [SET-UP].
Use
[
KK
/
LL
] to point to "ZERO
RETURN", then press
[ENTER].
The unit will begin rewinding
and the counter will appear on the TV screen.
The tape will automatically stop when the
counter returns to 0:00:00 (approx.).
- TV/VCR SETUP -
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
B ZERO RETURN
TIME SEARCH
INDEX SEARCH
TV/VCR SECTION
This function enables you to improve the
picture quality when playing back worn
cassettes such as rented tapes.
1 Press [SET-UP].
Use
[
KK
/
LL
] to point to
"USER’S SET UP", then press
[ENTER].
2 Use [
KK
/
LL
] to point to
"RENTAL".
Press
[ENTER] to select "ON".
NOTE:
• To cancel the setting, select "OFF" at this step.
3 Press [SET-UP] to exit the menu.
4 Press [PLAY B] to start
playback.
NOTE:
• This setting will not change even if you turn off the
unit.
T1202UC(EN).QX3 06.2.15 3:44 PM Page 16