AUTO Write: #AUTO 0 Auto range off
#AUTO 1 Auto range on
Answer: #AUTO 0 or 1
Read: ?AUTO
Answer: AUTO 0 or 1
ZERO Write: #ZERO 1 Starts the Zero routine without further request
Answer: OK, if accepted
Read: ?ZERO
Answer: Error message, if Zero is not finished
OK if Zero is finished
FILTER Write: #FILTER 1 Filter on
#FILTER 0 Filter off
Answer: FILTER 0 or FILTER 1
Read: ?FILTER
Answer: FILTER 0 (off) or FILTER 1 (on)
UNIT Write: #UNIT 0 for T
#UNIT 1 for G
#UNIT 2 for A/m
Answer: UNIT 0...2
Read: ?UNIT
Answer: UNIT 0...2
TEMP Write: #TEMP 0 Temperature display off
#TEMP 1 Celsius
#TEMP 2 Fahrenheit
Answer: TEMP 0...2
Error message, if a probe without temperature sensor is connected
Read: ?TEMP
Answer: Temperature, e.g. 25 °C
Error message, if a probe without temperature sensor is connected
LIMIT #LIMIT 0 Limit off
#LIMIT 1 Limit +/-
#LIMIT 2 Limit abs
Answer: LIMIT 0…2
Read: ?LIMIT
Answer: LIMIT 0…2
To Next Page
