Magnetek Impulse VG+ series 4 Product Guide

Product Transition Guide
IMPULSE
®
•G+ & VG+ Series 4
IMPULSE®•G+ & VG+ Series 3 to Series 4 Transition Guide August 2011
Page 36 of 54
Magnetek, Inc.
Min Torque Ref C5-03 60% C5-03 60% --
Look Speed I C5-04 6 Hz -- -- --
Look Speed 2 C5-07 20 Hz -- -- --
I/T Ref for LS 2 C5-08 160% -- -- --
Look Speed 3 C5-09 40 Hz -- -- --
I/T Ref for LS 3 C5-10 160% -- -- --
I Ref for > LS 3 C5-11 160% -- -- --
LC Holding Time C5-12 1.00 sec -- -- --
LC Testing Time C5-13 0.25 sec C5-13 0.25 Hz --
LC Fault Speed C5-14 6 Hz C5-14 6 Hz --
Swift Lift 0/1
(G+S3)
Ultra Lift 0/1
(VG+S3)
C6-01 0 C6-01 0
0: Disabled 0: Disabled
1: Enabled
Automatic
1: Enabled Auto
2: Enabled by MFI
= 13
2: Enabled by
MFDI
--
3: Enabled
Adaptive
--
4: Adaptive by
MFDI
Swift Lift ForSpd
(G+S3)
Ultra Lift ForSpd
(VG+S3)
C6-02 60 Hz C6-02 60 Hz --
Swift Lift RevSpd
(G+S3)
Ultra Lift RevSpd
(VG+S3)
C6-03 60 Hz C6-03 60 Hz --
SL Fwd Torque
(G+S3)
UL Fwd Torque
(VG+S3)
C6-04 50% C6-04 50% --
SL Rev Torque
(G+S3)
UL Rev Torque
(VG+S3)
C6-05 30% C6-05 30% --
UL Enabling Spd C6-06 59 Hz C6-06 59 Hz --
UL Delay Time C6-07 2.0 sec C6-07 2.0 sec --
SFS Acc Gain C6-08 1.0 C6-08 1.0 --
Normal OS Level
C6-09
(VG+ only)
60 Hz -- -- --
Torq Limit Fwd C7-01 150% C7-01 150% --
Torq Limit Rev C7-02 150% C7-02 150% --
Torq Lmt Fwd Rgn C7-03 180% C7-03 180% --
Torq Limit Rev
Rgn
C7-04 180% C7-04 180% --
Torq Limit Gain C7-07 1.25 -- -- --
Trav Trq Limiter
C7-08
(VG+ only)
0 C7-10 0
0: Disabled 0: Disabled
1: Enabled 1: Enabled
Limiter Freq
C7-09
(VG+ only)
2.0 C7-11 2.0 --
Parameter
Name
Series 3 Series 4 Comments
No. Default No. Default Series 3 Series 4

Magnetek Impulse VG+ series 4 Specifications

General

Brand	Magnetek
Model	Impulse VG+ series 4
Category	Controller
Language	English