Need help?Do you have a question about the Magnetrol C75 and is the answer not in the manual?
Details on proper piping configuration and support for the liquid level control.
Specifies requirements for mounting the control unit, ensuring vertical alignment.
Provides step-by-step instructions for wiring the liquid level switches correctly.
Explains the magnetic principle behind the float-operated level switching mechanism.
Details how to adjust the differential between switch actuation and reset points.
Procedures for inspecting and verifying the functionality of the switch mechanism.
Details on proper piping configuration and support for the liquid level control.
Specifies requirements for mounting the control unit, ensuring vertical alignment.
Provides step-by-step instructions for wiring the liquid level switches correctly.
Explains the magnetic principle behind the float-operated level switching mechanism.
Details how to adjust the differential between switch actuation and reset points.
Procedures for inspecting and verifying the functionality of the switch mechanism.
General| Category | Level Switch |
|---|---|
| Technology | Capacitance |
| Material | 316 stainless steel |
| Enclosure | NEMA 4X |
| Process Connection | 3/4" NPT |
| Operating Temperature | -40 to 85 °C (-40 to 185 °F) |
| Output Signal | SPDT or DPDT relay |
To Next Page
