What to do if my Magnum CSW1012 has no AC output but the status indicator is green?
If your Magnum Inverter shows no AC output but the status indicator is green, examine the connected load and then reset the GFCI.
What to do if my Magnum Inverter has no output voltage and the status indicator is off?
If your Magnum Inverter has no output voltage and the status indicator is off, first, ensure the unit is turned on according to the instructions in the Operation section. If it still doesn't work, check if the fuse or disconnect switch (if installed) has blown or is turned off.
General| Continuous Output Power | 1000W |
|---|---|
| Input Voltage | 12 VDC |
| Output Voltage | 120 VAC |
| Output Frequency | 60 Hz |
| Waveform | Modified Sine Wave |
| Protection | Overload |
| Cooling | Fan |
Guidelines for selecting the correct DC wire size based on distance.
Explains the necessity and types of DC overcurrent protection.
Procedures for properly grounding the inverter.
Instructions for making secure and correct DC cable connections.
Steps for connecting the inverter to the battery bank, including safety warnings.
Steps to perform a functional test of the inverter.
Steps to periodically test the GFCI outlet for proper function.
Table listing error codes, conditions, and corrective actions.
Guide to common problems, symptoms, and solutions.
To Next Page
