BA031701-en
Printing and Re-display of the Measurement Values
(Re-display of the measurement values is
possible with the RECO remote
control.)
• The print program is started with F7. Enter Program 1 and confirm with star key
(*). Printout follows.
• Re-display of the shock absorber with Shift + Axle number + key F10.
If AN5 displays are present, press the F10 key again to switch to the wheel
weight.
• Re-display of the side-slip tester with Shift + Axle number + key F9 if available.
• New vehicle (NEW) with pound key # and star key * (Delete all measurement
values).
Pos: 56 /-----Fo rmat-----/ MANUELLER UMBRUCH Seitenumbruch @ 0\mod_113440357768 7_0.docx @ 1277 @ @ 1
To Next Page
Loading...
