EasyManua.ls Logo

Mahindra 10 Cab Series 4510C - Front Wheel Drive Lever; Driver’s Seat; Tilt Pedal

Mahindra 10 Cab Series 4510C
115 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
40
Do not use high engine RPM when engaging Diff lock If the diff lock does not
release after removing the foot from the diff lock pedal alternatively brake
with the left and right brake until it gets released.
important
Never use the diff lock at high speed or on the road as this can cause roll over
and injury.
Caution
Front wheel drive lever
In the ON position the front wheels are
engaged and in the OFF position they are
disengaged.
Engage & disengage the front wheel drive
with the front wheels in the straight position
and at low Engine RPM.
important
Use of front wheel drive improves traction performance.
Do not use front wheel drive at
high speed or on the road as
premature wear of components
will result.
important
Driver’s seat
To adjust the seat backwards and forwards lift the
lever at the front of the seat and set it to the
desired position
Ensure that the tilt pedal has locked before
moving the tractor.
Danger
Tilt pedal
To adjust the inclination of the steering wheel with a 3
stages and set it to the desired position.
Always use the clutch when
using the front wheel drive
lever.

Table of Contents

Related product manuals