© Copyright Mahindra & Mahindra Ltd. 012016
10-7
When the air conditioner is ON, air gets cooled and de-humidified
before being circulated inside the cabin. In hot weather conditions, it
will take slightly longer to cool the interior as compared to cooler
weather. Fuel consumption will be relatively higher if the vehicle is
being driven with the air conditioner.
The following steps outline the procedure to switch ON the AC;
1. Adjust the blower speed as required.
2. Select the air distribution mode as desired.
3. Select the air re-circulation mode if required.
4. Press the AC button to turn on the AC.
5. Adjust the temperature control dial as per the temperature
requirement.
• In certain operating conditions when the engine gets
overheated, the engine management system may switch off
the air conditioner intermittently
• If the vehicle has been parked in sun for long, then we
suggest to achieve fast cooling : The windows to be rolled
down, blower to be kept ON at max. AC ON. Engine ON, roll
up the windows after 1 to 3 minutes. This will help in pushing
out the heated air out. This step is a recommendation
• Occasionally the air conditioner might not actually be
functioning even when the LED on the AC switch remains
illuminated. This is to be considered as normal AC system
operation
• During extreme cold weather conditions, the air conditioner
may not function until the temperature of the air near the
evaporator rises above a pre-defined threshold
• When the air conditioner is ON, moisture is extracted from
the air. The resulting condensate is drained off from the
vehicle. It is therefore normal, if you see a small pool of water
under your vehicle
Your vehicle is equipped with an HVAC filter. If the AC
performance is considerably low, it is recommended have the
HVAC filter checked at the nearest Mahindra Dealer.
HEATING, VENTILATION AND AIR-CONDITIONING SYSTEM (HVAC)
To Next Page
Loading...
Need help?
General
