© Copyright Mahindra & Mahindra Ltd. 012016
2-17
The following sections outline the procedure for changing a flat tyre;
2.7.1 Jack/Wheel Spanner
The jack, wheel spanner, tow hook and jack handle are placed in the
tool kit organiser above the spare wheel. It is held in place by a
securing nut. Remove the nut, jack handle, wheel spanner and tow
hook to access the Jack.
2.7.2 Spare Wheel Removal
The spare wheel is mounted below the luggage compartment at the
rear end of the vehicle. It is held in place by a lock stud with tool kit
organiser.
GENERAL
To Next Page
Loading...
