© Copyright Mahindra & Mahindra Ltd. 012016
5-11
CORRECT SEAT BELT
POSITIONING
W12E25
Periodically check the seat belt as you ride to be sure it remains
snug and in position. If there is a sudden stop or impact, the belt will
lock into position. It will also lock (restrict) if you try to lean forward
too quickly.
If the driver’s seat belt is not fastened when the ignition is
switched ON, the seat belt warning lamp illuminates. Refer to
‘Warning Lamps’ in the ‘Features and Control’ chapter for
further details.
5.7.2 2-Point Lap type (if equipped)
This seat belt is applicable in some seating positions in some
variants as applicable. Insert the metal tab into the buckle until it
snaps. Position the lap belt on the hips as low as possible.
CORRECT SEAT BELT
POSITIONING
W12E26
5.7.3 Unfastening the Seat Belt (both 3-Point & 2-Point)
CORRECT SEAT BELT
POSITIONING
W12E27
To release the belt, press the buckle release button and allow the
belt to retract. If the belt does not retract smoothly, pull it out and
check for kinks or twists. Then make sure it remains untwisted as it
retracts.
SEATS AND SEAT BELTS
To Next Page
Loading...
Need help?
General
