Mahindra Thar CRDe - Technical Specification

Repair Manual MAN-00190
THAR CRDe BS-IV MAY 2012/Rev 1
The repair methods given by the manufacturer in this document are based on the technical specifications at the time of release. The methods may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part or whole of the present
document, are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of
Mahindra & Mahindra Ltd., will amount to unauthorized use and shall be liable for penalty/prosecution© 2012 Mahindra & Mahindra Ltd.
Technical Specifications
Figure Description Value
Clutch control type- Hydraulic- self adjusting
Pressure plate Diaphragm
Clutch Disc
Outer Dia (mm)
Inner Dia ( mm)
240±1
160± 1
Disc Thickness ( mm) 8.8 mm ( free)
Clutch disc run out 0.8 mm Max
Minimum thickness from
outer face to rivet head.
0.4 mm
Clutch pedal Suspended Type
Clutch pedal Ratio 7.4
Clutch Pedal Height above
carpet thickness of 10 mm.
Normal
Under full depression.
172 mm
165 mm.
Clutch pedal free play (
including push rod play at
pedal top)
5 to 6 mm
Page 141