Mahindra Thar CRDe - Clutch Overhaul

Repair Manual MAN-00190
THAR CRDe BS-IV MAY 2012/Rev 1
The repair methods given by the manufacturer in this document are based on the technical specifications at the time of release. The methods may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part or whole of the present
document, are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of
Mahindra & Mahindra Ltd., will amount to unauthorized use and shall be liable for penalty/prosecution© 2012 Mahindra & Mahindra Ltd.
 Clutch overhaul –
Block the front wheels, so that the vehicle does not move forward.
Disconnect the negative cable of the battery.
Remove the electrical connections to the starter
motor.
Remove the starter motor.
Remove the clutch slave cylinder from the
gearbox mounting.
Note: Remove the slave cylinder along with the
small Bundy tube. Disconnect the Bundy tube
from the main tubing.
Remove the propeller shaft from the gearbox
end.
Do not allow the propeller shaft to hang. Support
it.
Page 137