Repair Manual MAN-00190
THAR CRDe BS-IV MAY 2012/Rev 1
The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or whole of the present
document, are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of
Mahindra & Mahindra Ltd., will amount to unauthorized use and shall be liable for penalty/prosecution© 2012 Mahindra & Mahindra Ltd.
Step 13:
Assemble the 5th drive gear assembly on to the
5th/Reverse sub shaft.
Step 14:
Assemble the modified 5th driven gear and bearing
assembly on to the main shaft.
Step 15:
Assemble the spacer 5th drive gear on the sub
shaft.
For sub shaft shimming, refer to the Repair
Manual.
Step 16:
Assemble the bearing on the sub shaft.
To Next Page
Loading...
