Repair Manual MAN-00190
THAR CRDe BS-IV MAY 2012/Rev 1
The repair methods given by the manufacturer in this document are based on the technical specifications at the time of release. The methods may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part or whole of the present
document, are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of
Mahindra & Mahindra Ltd., will amount to unauthorized use and shall be liable for penalty/prosecution© 2012 Mahindra & Mahindra Ltd.
Remove the connecting rod caps and take out the
pistons.
Rotate the engine by 90 degree.
Remove the dampener pulley
Remove the tensioner pulley
Remove the idler gear after removing the 3 bolts.
Remove the camshaft’s main bolt and the 2-thrust plate
locking bolts.
To Next Page
Loading...
