Repair Manual MAN-00190
THAR CRDe BS-IV MAY 2012/Rev 1
The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or whole of the present
document, are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of
Mahindra & Mahindra Ltd., will amount to unauthorized use and shall be liable for penalty/prosecution© 2012 Mahindra & Mahindra Ltd.
Fan Blade & viscous fan drive assembly removal –
Caution: Do not remove the fan belt before removing
the nut.
Loosen the water pump nut.
Note that the threads are anticlockwise threads.
Hence to loosen then the direction of rotation has to
be clockwise when viewed from front
The fan blade assembly and the VFD assembly can be
removed together.
Water Pump removal –
Do not remove the cylinder block drain plate or the
radiator drain cock with t
pressurized. Serious burns from the splashing of hot
coolant can occur.
Before draining the system. The system pressure has
to be relieved.
Holding the radiator cap with a rag slowly open the
radiator cap.
The water may splash upward causing injury
Remove the fan blade
Remove the fan belt
Remove the thermostat housing along with the
thermostat after removing the mounting bolts.
Remove the inlet and outlet hoses.
To Next Page
Loading...
