The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes introduced by
the manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or whole of the present
document, are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of
Mahindra & Mahindra Ltd., will amount to unauthorized use and shall be liable for penalty/prosecution© 2021 Mahindra & Mahindra Ltd.
55
ACCEPTANCE CRITERIA
• EMS ECU should be connecting and read ECU tab should be able to access
ACTION TO BE TAKEN
OK NOT OK
• Connect i-SMART and try to clear all DTC’s
• If the DTC’s not getting cleared, contact TEKliner
for further assistance
• If the DTC’s got cleared. Turn OFF the ignition,
wait for 2 minutes. Turn ON ignition & Check
whether the issue is resolved
• Check CAN circuit
• Check EMS ECU power supply and
ground circuit
• If the issue still present, Contact
TEKliner for further assistance
Diagnostic Manual
XUV700 (Diesel)
UICU
MAN-01065
OCT - 2021/Rev 1
To Next Page
Loading...
