MAI International
GmbH
SAFETY DEVICES COPYRIGHT
Before starting the machine, ensure that all the
safety devices are fitted correctly and functioning
properly.
All parts of this documentation are subject to copy-
right (
©).
Photocopying or circulating the documentation, in
part or in whole, is prohibited. Safety devices may only be removed:
o after a standstill and
No part of this documentation may be reproduced,
stored in a retrieval system, transmitted or trans-
lated in any form or by any means without the prior
written permission of MAI International GmbH.
o if the machine is prevented from being re-
started (e.g. padlock on master switch).
When components are replaced, the purchaser
must ensure that the safety devices are fitted again
properly.
Copies of individual parts may be made and passed
onto third parties if they are required for locating
faults.
GENERAL SAFETY IN-
STRUCTIONS
© Copyright 2003, MAI International GmbH. All
rights reserved.
MAI International GmbH
The operating instructions must always be kept on
the machine.
Werkstrasse 17
A-9710 Feistritz/Drau
Company Register No. 93560 p
Klagenfurt Provincial Court
In addition to the operating instructions, the general
and local regulations on accident prevention and
environmental protection must be made available to
the operator and observed.
We reserve the right to alter any technical details of
the machine compared with the specifications and
illustrations in the present manual.
All safety regulations and warnings on the machine
must be legible and replaced as required.
No claims against the manufacturer, especially
regarding design and structure of the machine may
be derived from statements made in the operating
instructions.
MAI
®
und MAI-PUMP
®
are registered trademarks of
MAI International GmbH.
© Copyright 2003 V20/10/03 Page 6
To Next Page