Safety Function: The safety function prevents an immediate
increase in the frequency level to exceed 70 dB, during
frequency change.
If the Safety Function is disabled a message box appears.
Press Yes if you really want to disable the function or No if
you want to keep the function enabled (Figure 64).
Figure 64
Start with Tone: Pressing the Start with Tone button opens a
message box that allows for the selection of the test the
programm shall start with (Figure 65).
Figure 65
The following settings are available (Figure 66).
Permanent Pulse: Permanent pulse can be activating by
clicking the button.
Binaural: Binaural measurement can be performed in
addition to single left or right ear measurement. Select
Individual to change the levels for the right and left ear
individually. Select Simultaneous if you want the left and
right ear levels to match (Figure 67).
Figure 67
To Next Page
Loading...
