Operation Manual PILOT TEST
Press Enter to access this submenu. Select/deselect the
frequencies that are active and selectable during the test (Figure 23
and Figure 24).
NOTE: 1000 Hz cannot be turned off and is therefore excluded from the list.
Select the default tone type of Steady or Pulse. Steady presents
the signal continuously during the tone presentation. Pulse turns
signal on and off every 250 ms during tone presentation.
After having reached the highest (i.e. 8 kHz) or lowest (125 Hz) test
frequency device returns to 1 kHz automatically. When set to Off,
it will continue to next highest/lowest frequency.
This function sets the direction of the arrow ▲ ▼ keys to increase
the hearing level. Choose between:
• Increase up: Pressing ▲ will increase the hearing level (ie. 35 dB
to 40 dB). Recommended to use with Display type Table.
• Increase down: Pressing the ▼ will increase the hearing level (ie.
35 to 40 dB). Recommended to use with Display type Graph.
Select the test selected upon turning on the
device: PILOT TEST or Audiometry (Figure 25).
Select the operating language of the device
(Figure 26). Display languages include:
Deutsch, English, Español and Français.
To Next Page
Loading...
Need help?
General
