In this section, we will show you some patch examples. There are some creative tips and tricks described, which can
be helpful when exploring the sound of IMPLEXUS and its capabilities. Lets patch, push, turn and tweak some knobs
to create a couple of nice sounds!
NOTE: for some of these examples you will need one or more (mono) mini jack patch cables.
PATCH : “Rhythmical manoeuvres”
In this example we will play with both LFOs at different clock divisions to create some “rhythmical manoeuvres”.
Set the internal clock to a “slow” tempo by pressing the TAP TEMPO button twice. An interval of roughly 1 second
between the taps is fine. Don’t forget to turn on DRONE mode and turn the SUSTAIN control of AMP EG
fully clockwise.
Now set all controls as shown in image on the next page.
You will hear some “rubber” like synth sounds, with a beating rhythm caused by the difference in LFO divisions.
The DELAY can be synchronized to the internal (TAP TEMPO) clock in different clock divisions. This will create even
more interesting rhythmic manoeuvres!
When you have found a nice rhytmic sound you could try turning the LFO 1 AMT of the HARMONICS section. Start
from a counterclockwise position, slowly turning it fully clockwise. You could also experiment with the FOLDER knob
changing the sound from a “rubber” sound to something more “vocal” like.
MAJELLA
ENGINEERING
IMPLEX
MADE IN THE NEHTERLANDS
PATCH EXAMPLES
4140.
To Next Page
Loading...