MAJORITY ARBURY 2 - FM Radio; Tuning FM Radio Manually

9
EN
Press the ‘Power/Mode’ button (Ref.3) multiple times to switch to FM.
The rst time you do this, the FM frequency “87.5 MHz” will be displayed
on the screen.
Fully extend the antenna (Ref.11).
To scan for the available stations with good signal, simply press and
hold the ‘Menu’ button (Ref.1) then select Full scan to initiate a full scan.
The next available station will then begin to play.
To go to the next station with good signal, press (do not hold) the ‘Scan’
button.
The radio will display station information when you press the ‘Info/
Menu’ button (Ref.1). Press multiple times to view all information
available.
How to tune a specic frequency manually
To listen to a specic frequency, press and hold the ‘Next’ button (Ref.6)
to search forward quickly, or the ‘Prev’ button (Ref.5) to search back
quickly. It will stop searching when the button is released.
To search slowly, press the ‘Next’ (Ref.6) and ‘Prev’ (Ref.5) button
multiple times rather than holding.
Instructions Guide
FM Radio