MAJORITY ARBURY 2 - Clock & Date Settings; Manually Setting Radio Time

13
EN
Instructions Guide
Once the radio has been put into DAB mode, the time and date should
automatically set. If this does not happen or you wish to alter the time
and date, follow the below guidance:
Manually Setting the Time
Ensure the unit is turned on and out of standby.
To enter radio settings, press and hold the ‘Info/Menu’ button (Ref.1).
Use the ‘Prev/Next’ buttons (Ref.5/6) to scroll through to “Time/Date”
and press the ‘Enter/Snooze’ button to conrm the choice (Ref.7).
Once this option is selected, the hour will then ash on the display
screen. You can now alter the time hour by pressing the ‘Prev’ (Ref.5) or
‘Next’ (Ref.6) buttons until the required hour is displayed.
To conrm the hour press the ‘Enter/Snooze’ (Ref.7) button.
The minutes will then ash on the display screen. Press the ‘Prev’ (Ref.5)
or ‘Next’ (Ref.6) buttons until the required minute is displayed.
To conrm the minute press ‘Enter/Snooze’ (Ref.7).
The time is now set and you will be able to alter the date in the next
step.
Clock & Date Settings