MAJORITY ARBURY 2 - Other Functions; Radio Sleep Timer Function

17
EN
Instructions Guide
Sleep Setting
This enables you to programme the radio to switch o at a selection of
set times up to 120 minutes from activation.
Press and hold the ‘Info/Menu’ button (Ref.1).
Use the ‘Prev/Next’ buttons (Ref.5/6) to choose “Sleep Timer” and press
the ‘Enter’ button (Ref.7) to conrm this option.
Using the ‘Prev’ or ‘Next’ buttons (Ref.5/6) choose the sleep timer
amount from activation: OFF, 15mins, 30mins, 45mins, 60mins, 90mins
or 120mins.
When your choice is displayed press the ‘Enter/Snooze’ button (Ref.7).
The system will automatically start the timer.
To turn the sleep timer o, follow the above instructions and select
“OFF” from the choices.
Once the timer has been set, the minutes will count down on the
display screen. Example: if set to turn o in 5 minutes, “S5” will ash,
counting down to “S0”. The radio will then go into standby mode.
Other Functions