Using the AUX IN Cable
Use the AUX Stereo Audio Cable (included) to connect the TV’s
stereo AUX (L/R) audio output socket.
Connect the audio output cable of the soundbar via the‘AUX’
input sockets of the unit.
Press the POWER button on the soundbar or POWER button
directly on the remote control (Rem.1
)
to switch on the unit.
Then press MODE on the remote control (
Rem.26
) or press the
Mode button on the unit to scroll to the AUX INfunction.
Turn on your television
Troubleshooting:
If you are not receiving a picture or
encountering interference, please ensurethat the AUX cable is
being connected to‘output’AUX port on your TV set. This will
ensure that the sound is being exported correctly.
If your TV does not have ‘output’ AUX port, please use an
alternative connection method.
AUX stereo audio cable
Rear view of the unit
13
To Next Page
Loading...
