Wall Mount Installation Guide
Place the paper guide on the wall Verify with a level gauge that the inclination
where you want to hang the soundbar. angle of the soundbar is zero degrees.
Locate the screw holes on the paper Make the holes with the corresponding
guide and mark a point with a pencil. drill bit according to the type of wall.
It is advisable to leave no more than 5mm For a better sound experience,
between the head of the screw and the wall it is advisable to place the soundbar
to minimize the inclination angle of the soundbar. at the same height of the ear.
22
Hang the soundbar
To Next Page
Loading...
