Troubleshooting
If the soundbar does not work properly as desired, please check
the following.
Check whether the power is switched on or
off at the wall.
Check whether the power adaptor is
properly connected to power outlet or not.
Check whether cables are properly installed.
If they are, please try alternative cable to
connect to your TV if possible.
Check unit is out of standby and in mode.
No sound from bluetooth
connection
Forget the soundbar from your device and
reconnect.
Switch off and unplug the unit. Leave it for
2 minutes and switch it on again.
If a particular mode is causing problems,
please try an alternative connection to
your TV such as Optical or Bluetooth.
Remote control does not work
[properly]
Check whether the battery run out or not.
Replace with a new one if necessary.
Check whether there is obstacle on the
front of remote sensor.
20
Troubleshootingg
To Next Page
Loading...
