7
Press the ‘Mode’ button (Ref.4) to switch to DAB/DAB+ Radio. On
rst use it will automatically scan all stations and save them.
Fully extend the antenna (Ref.13).
To auto scan, press the ‘Scan’ button (Ref.5) and then release.
This will start scanning up the frequency band and store all
stations that have a good signal up to 240 MHz.
After searching has nished, it will automatically play the rst
station stored.
To browse through all stations that have been stored, use the
‘Next’ (Ref.9) and ‘Prev’ buttons (Ref.8) to scroll through them.
When on the chosen station, press the ‘Enter/Snooze’ button
(Ref.12) to begin listening to that station.
The radio will display station information when you press the
‘Info/Menu’ button (Ref.6). Press it multiple times to view all
information. Please see page 10 for further details.
When you turn on the radio again after it switching o, it will
automatically tune to the same station (DAB or FM) that was last
selected.
Instrucons Guide
DAB/DAB+ Radio
To Next Page
Loading...
