12
EN
Network
●
While in ‘System Settings’, press
12
w
/
s
3
to select Network. Press the SELECT button to conrm.
●
Press
12
w
/
s
3
buttons to select from the following settings, press the SELECT button to conrm
Network wizard SSID – select the desire wireless network.
Rescan – Scan for available networks.
Manual cong – select wireless network with DHCP enable/disable.
PBC Wlan setup Select WPS on the unit and press the WPS button on the modem device
that you wish to connect with. Press TUNING/SELECT dial on unit or
SELECT button on remote control to continue.
View settings Display the setting on the unit.
Manual settings Select wireless network with DHCP enable/disable.
NetRemote
PIN Setup
To dene a PIN number to be entered before being able to connect to
the unit remotely over a network
Network prole View the connected network.
Clear network
settings
To delete the connected network memory in Network prole.
Keep network
connected
To dene whether remains connected to its network in Standby mode
and when not in Network radio mode.
3. Press the BACK button on the unit or remote control to cancel the setting and return back to the
previous menu.
Time/Date
The Time/Date can be automatically set once it has been connected to the Internet, DAB or FM radio
station with time/date information. You may also adjust the Time/Date manually.
Press CLOCK button on remote control can access Set Time/Date menu to adjust Time/Date,
Alternatively,
- In System Settings, press
12
w
/
s
3
buttons to select Time/Date and press the SELECT button to
conrm. Press
12
w
/
s
3
buttons to select Set Time/Date and press the SELECT button to conrm.
1. The date digits will ash on the display.
2. Press
12
w
/
s
3
buttons to adjust the day and then press the SELECT button to conrm.
3. Repeat above Step (2) to set the Month/Year/Hour/Minute.
4. The date and time settings are now complete.
Instructions Guide
To Next Page
Loading...
Need help?
General
