10
Instrucons Guide
Standby
To put the music system in standby, press the ‘Power/Standby’
button (Ref.) or the ‘ON/STANDBY’ button (Ref.) on the
remote.
To turn o fully, switch it o at the mains. The cord must be out
of reach of children.
Language Setting
The default display language is English. You can change to
Deutsch by pressing Menu <Full Scan> will be displayed on the
screen, press ‘Next’ to get <System>, then press ‘Play/Pause’ to
enter. After that, press ‘next’ to get Deutsch, then press ‘Play/
Pause’ to conrm.