11
Press the ‘Mode’ button (Ref.) multiple times on the unit to
switch to DAB/DAB+ Radio. On rst use when DAB Radio is
activated for the rst time the display will show “full scan”, press
the ‘OK’ button on the unit (Ref.) or the ‘enter/play’ button
(Ref.) on the remote.
To select the mode from the remote press the ‘FM/DAB’ button
(Ref.).
Fully extend the antenna (Ref.).
To auto scan, press the ‘Menu’ button (Ref.) on the remote and
use the ‘Next’ (Ref.) and ‘Previous’ buttons (Ref.) to scroll
through options. Select “Full Scan” and press the ‘Enter’ button
(Ref.). This will start scanning up the frequency band and store
all stations that have a good signal.
The radio will automatically save all the stations with a strong
signal, up to 240 MHz. After searching has nished it will
automatically play the rst station stored.
To listen to all stations that have been stored use the ‘Next’
(Ref.) and ‘Previous’ buttons (Ref.) to scroll through them,
press the ‘Enter’ button (Ref.) when on required station.
The radio will display station information when you press the
‘Info’ button (Ref.) on the remote. Press it multiple times to
view all information. Please see page 26 for further details.
DAB/DAB+ Radio Functions
Instrucons Guide
To Next Page
Loading...
Need help?
General
