MAJORITY OAKINGTON - Alarm or Timer Setting

30
Instrucons Guide
Alarm or Timer Setting
In Standby, The Setting Timer can be set to automatically turn on
and o at certain times and can also be used as an alarm. Press
and hold the ‘Timer’ button (Ref.) on the remote control.
The options available will ash on the display. Choose which
sound option you would like to come on using the ‘Previous’ or
‘Next’ buttons (Ref./23) on the remote.
Press the ‘Timer’ button (Ref.) on the remote control to
conrm your option. Input the time that you would like the unit
to come on using the number key pad on the remote control
(Ref.). Press the ‘Timer’ button (Ref.) on the remote control
to conrm your option.
Change the volume to the required level using the ‘Previous’
or ‘Next’ buttons (Ref./23) on the remote. Press the ‘Timer’
button (Ref.) on the remote to conrm your option.
Input the time that you would like the unit to switch o using
the number key pad on the remote control (Ref.). Press the
‘Timer’ button (Ref.) on the remote control to conrm your
option.
Note: When using the Alarm Buzzer Option, the “timer o”
setting is not available.