MAJORITY OAKINGTON - Audio-In Connection; USB Device Playback

24
Instrucons Guide
Audio-In
You can connect your phone or tablet with an Aux 3.5mm
cable that connects to the Audio-in jack on the back of the unit
(Ref.).
Insert the audio cable. To choose your mode press the ‘Mode’
button (Ref.) on the unit. To scroll through your choices which
will be displayed on the front screen (Ref.) – press the ‘Mode’
button (Ref.) on the unit until you are on your required option
“Audio”, or select the ‘Audio’ button on the remote (Ref.).
Up to 20 tracks can be preselected.
Note: when using playback, the ‘Next’ and ‘Previous’ buttons can
only be used on the unit not on the remote.
USB Mode
Insert the USB device into the back of the unit (Ref.).
To choose USB Mode, press through your choices using the
‘Mode’ button (Ref.) on the unit. The choices will be displayed
on the front screen (Ref.), select “USB”.
Alternatively press the ‘USB’ button on the remote (Ref.).
The device’s stored music will start playing automatically. Mobile
devices can be charged via the USB Port.