US
14
BLUETOOTH OPERATION
Pairing a Bluetooth Device for the First Time
Press the POWER button on the soundbar (Ref.4) or on the remote control (Ref.14) to
switch on the unit.
Press the INPUT button repeatedly on the remote control (Ref.24) or press the INPUT
button on the soundbar (Ref.5) repeatedly until Bluetooth mode is selected (indicated
by a ashing blue light).
From your Bluetooth device, select the “Majority Teton” when prompted to choose a
Bluetooth device.
If a password is required, enter “0000”. If you encounter issues at this stage, please
refer to the user manual for your Bluetooth device for instructions on pairing and
connecting Bluetooth devices.
When successfully connected, a beep will issue from the unit and a solid blue light will
be displayed. After initial pairing, the unit will stay paired unless manually unpaired by
the user, or until the device is reset.
If your device should become unpaired or you nd it is unable to connect, repeat the
above steps.
BLUETOOTH
To Next Page
Loading...
