- 13 -
A
A
A
B
B
D
D
C
It is forbidden to operate the machine if the
operating and safety instructions have not been
understood. Please check the safety devices
are functioning and complete before use.
•
All covers have to be mounted (A).
•
Safety beam guard must be mounted (B).
•
The release for cutting is allowed only if
the two-hand safety device is operated at the
same time (C)
•
Safety light beam:
The machine stops immediately if anyone
reaches into the cutting area (D).
We recommend you keep a record of your test
results.
•
Operation
•
To Next Page
Loading...
