MakerBot Sketch Replacement Guide

1
MakerBot Sketch Extruder Coupler Replacement
MakerBot
Tools Needed:
Phillips Screw Driver
2.5 mm Hex Driver
Pair of thin Tweezers
Small Container for Screws
10 mm Gear Wrench
Color Guide:
Button Heads Screw
Action
read Forming Screw
Socket Cap Screw
Flat Head Screw

MakerBot Sketch Specifications

General

Build Volume	150 x 150 x 150 mm
Filament Diameter	1.75 mm
Nozzle Diameter	0.4 mm
Extruder Type	Single
Print Speed	Up to 150 mm/s
Connectivity	USB, Wi-Fi
Supported Materials	PLA
Operating Temperature	15 - 30°C