Makita 2030N - User Manual

Planer- Jointer
Auto feed
320 mm (1242") MODEL 2030N
With Electric Brake
Width 0 mm - 150 mm 150 mm - 240 mm 240 mm - 320 mm High Low
IO' - 5-7/87 l5-7/8" - 9.1/2"1 (9-112" - 12.1/2"1 speed speed
Feed
320
mm .weed
112~1'2"' High speed 2 mm 15/64") 1.5mm11/16"l 1 mm15/128'1 8m 5m
1.5mm11/16,,) 126ft.l (17ftI
Low speed 3
mm I1 18") 2 mm 15/64")
INSTRUCTION MANUAL
Manual feed
SPECIFICATIONS
3mm (1/8") __
I Cutting I
width
Auto feed
Manual feed
No. of knives
2
Max. cutting depth
I Feed rate /man
Table SIZE Fence size Stock height
320mmx
600mm 112.112" x 23-518")
~
12.7 mm - 185 mm (1 12" - 7-1 14")
~
155" x 1,MOmm l6-1/8' x 59")
730mmx 105" 128-3/4"
x 4-1/8"1
No load speed Overall length IW x L x HI Net weight
7,000
R/min. 780 mm x 1,500 mm x 775 mm 1303/4' x 59" x 30-1 /2"l
150 kg 1330 Ibs)

Makita 2030N Specifications

General

Planing Depth	3 mm
Power Input	1, 650 W
No Load Speed	8, 000 RPM
Maximum Cutting Depth	3 mm
Max. depth of cut (planing)	3 mm
Motor Power	1650 W
No-load Speed	8000 rpm
Weight	27 kg
Max. depth of cut (thicknessing)	3 mm
Planing Width	304 mm (12")
Planer Width	304 mm

Summary

Specifications

General Safety Precautions

General Safety Precautions (For All Tools)

Essential safety guidelines for operating the power tool safely.

Additional Safety Rules

General Safety Rules

Further crucial safety rules covering user actions and tool operation.

Operational Safety Rules

Grounding Instructions

Grounding Instructions

Explains the importance and methods of proper grounding for electrical safety.

Specific Safety Rules for Operation Modes

Jointer Safety Rules

Specific safety instructions for jointer operations to prevent accidents.

Auto-Planer Safety Rules

Specific safety instructions for auto-planer operations to prevent accidents.

How to Use: Auto-Planer

Adjusting Depth of Cut

Auto-Planer Operation and Adjustments

Switchover of Cutting Speed

Jointer Operation

Cutting Depth Adjustment

Fence Angle Adjustment

Operation Procedures

Jointer Feeding Techniques

Jointer Techniques

Jointing Edge

Using Hold-Down;Push Blocks

Jointer Feed Direction

Direction of Grain

Changing Planer Blades

Removing Planer Blades

Step-by-step guide for removing planer blades from the drum.

Planer Blade Installation

Removing Blades (Continued)

Further steps for removing blades, including locking the drum.

Installing New Blades

Instructions for correctly installing new planer blades.

Blade Setting Procedure

Auto-Planer Blade Setting

Jointer Blade Setting

Various Adjustments

Adjusting Infeed;Outfeed Rollers (Auto-planer)

Maintenance

Replacing Carbon Brushes

Tool Care and Lubrication

Sharpening Planer Blades

Sharpening Planer Blades

Detailed procedure for sharpening planer blades using a dressing stone.

Accessories