Using guide rule
(Rip
fence)
When cutting widths
of
under
150
mm
(6")
repeatedly, use
of
the guide rule will assure
fast, clean, straight cuts.
To
attach the guide rule (rip fence), secure
the rule holder to the base with the screw
(do not tighten).
Insert the guide rule between the base and
the rule holder. Now tighten the screw
with the hex wrench.
Using circular guide
Use
of
the circular guide insures clean,
smooth cutting of circles (radius; under
200
mm
;
7-7/8")
and arcs.
Guide
\
Circular
guide
11
To Next Page
Loading...
