To Next PageTo Next Page
Need help?Do you have a question about the Makita 4302C and is the answer not in the manual?
General| Type | Jigsaw |
|---|---|
| Cord Length | 2.5 m |
| Power Source | Corded Electric |
| Bevel Cutting Angle | 45 ° |
| Orbital Settings | 4 |
Key safety rules for electric tools, covering work area, personal protection, and proper handling.
Rules for avoiding hazards like nails, hollow pipes, and electrical wires during operation.
Step-by-step guide for attaching Makita jig saw blades using the hex wrench and roller.
Instructions for fitting universal shank blades, ensuring proper seating in the blade holder.
Explanation of how orbital action enhances cutting speed for softer materials.
How to start, stop, and lock the trigger for continuous operation.
Details on adjusting the tool speed using the speed change dial for optimal cutting performance.
Guidance on holding the tool and moving it along the cutting line.
Instructions for tilting the base to make angled cuts from 0° to 45°.
Method for performing cuts flush against a surface or edge.
Technique for starting cuts in the middle of a workpiece by lowering the blade into it.
Tips for trimming edges and improving cut surface finish.
How to attach and use the guide rule for straight, parallel cuts.
Instructions for attaching and using the circular guide for cutting circles and arcs.
Importance of using coolant or cutting oil for metal cutting to prevent blade wear.
Guidelines for inspection, replacement of parts like carbon brushes, and recommended service centers.
List of compatible accessories including guides, hex wrench, and various jig saw blades.
Table detailing recommended blades for different materials like wood, plastics, aluminum, and mild steel.
Itemized list of all components with part numbers and quantities used.
Information on the warranty policy, exclusions, and limitations for the Makita tool.
