5 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: DBS180
Belt size 9 mm x 533 mm
Belt speed 600 - 1,700 m/min
Overall length 500 mm *1
Rated voltage D.C. 18 V
Net weight 2.1 kg
*1. With abrasive belt and battery cartridge (BL1860B).
•
• Weight, with battery cartridge, according to EPTA-Procedure 01/2014
Battery cartridge BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /
BL1840B / BL1850 / BL1850B / BL1860B
Charger DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
DC18SH
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING: Use of any other battery cartridges
Intended use
The tool is intended for the sanding of large surface of
wood, plastic and metal materials as well as painted
surfaces.
Noise
The typical A-weighted noise level determined accord-
ing to EN62841-2-4:
Sound pressure level (L
pA
) : 77 dB(A)
Uncertainty (K) : 3 dB(A)
NOTE:
The declared noise emission value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE:
The declared noise emission value(s) may
also be used in a preliminary assessment of exposure.
WARNING:
WARNING: The noise emission during actual
WARNING: -
trigger time).
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN62841-2-4:
Work mode: sanding metal plate
Vibration emission (a
h
) : 2.5 m/s
2
or less
Uncertainty (K) : 1.5 m/s
2
NOTE: The declared vibration total value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also
be used in a preliminary assessment of exposure.
WARNING:
WARNING: -
trigger time).
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
To Next Page
Loading...
