To Next PageTo Next Page
Need help?Do you have a question about the Makita DDF470RFJ and is the answer not in the manual?
General| Model | DDF470RFJ |
|---|---|
| Category | Drill |
| Power Source | Battery |
| Voltage | 18V |
| Battery Type | Li-ion |
| Chuck Capacity | 1.5 - 13 mm |
| Speed | 2-Speed |
| Max Torque | 60 Nm |
| Max Torque (S/H) | 60 Nm |
| Max. in steel | 13 mm |
| Max. in wood | 38 mm |
| Weight | 1.7 kg |
| Type | Cordless |
| Chuck Size | 13 mm |
| No Load Speed (Hi) | 1, 700 rpm |
Read all warnings, instructions, and specifications to prevent injury.
Specific safety advice for cordless driver drills.
Hold tool by insulated surfaces, ensure firm footing, keep hands away from rotating parts.
Never exceed bit speed rating, start slow, apply pressure in line with bit.
Read instructions for charger/battery, do not disassemble, stop if operation time shortens.
Place bit in screw head, apply pressure, start slowly, increase speed. Release trigger when clutch engages.
Adjust ring to marking, then proceed. Drill in wood/metal instructions follow.
