3 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: DML815
LED 0.5 W x 4
Dimensions
(L x W x H)
227 mm x 79 mm x 116 mm
Rated voltage D.C. 14.4/18 V
Net weight 0.56 - 0.93 kg
Battery cartridge BL1415N / BL1430 / BL1430B / BL1440 / BL1450 / BL1460B
BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /
BL1840B / BL1850 / BL1850B / BL1860B
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsmaydifferfromcountrytocountry.
• Someofthebatterycartridgeslistedabovemaynotbeavailabledependingonyourregionofresidence.
• Theweightmaydifferdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-
estcombination,accordingtoEPTA-Procedure01/2014,areshowninthetable.
Operating time
Battery cartridge Operating time
BL1430 / BL1430B 17 hours
BL1460B 35 hours
BL1830 / BL1830B 24.5 hours
BL1860B 54 hours
• Theoperatingtimesintheabovetablearearough
guideline. They may differ from actual operating
times.
Symbols
Thefollowingsshowthesymbolsusedfortheequip-
ment.Besurethatyouunderstandtheirmeaningbefore
use.
Read instruction manual.
Indoor use only.
Li-ion
Only for EU countries
Donotdisposeofelectricequipmentor
batterypacktogetherwithhouseholdwaste
material!
InobservanceoftheEuropeanDirectives,
on Waste Electric and Electronic
EquipmentandBatteriesandAccumulators
andWasteBatteriesandAccumulators
and their implementation in accordance
withnationallaws,electricequipmentand
batteriesandbatterypack(s)thathave
reachedtheendoftheirlifemustbecol-
lected separately and returned to an envi-
ronmentallycompatiblerecyclingfacility.
Battery protection system
Thetoolisequippedwiththeprotectionsystem,which
automatically cuts off the output power for long ser-
vice life. The light goes off during operation when the
remainingbatterycapacitygetslow.Thisiscausedby
the activation of the protection system and does not
showtrouble.Removethebatterycartridgefromthe
tool and charge it.
SAFETY WARNINGS
IMPORTANT SAFETY
INSTRUCTIONS
WARNING: When using electric tools, basic
safety precautions should always be followed to
reduce the risk of re, electric shock, and per-
sonal injury, including the following:
READ ALL INSTRUCTIONS.
1. Do not look into the light, or do not expose the
light to eyes.Eyesmaybedamaged.
2. Do not cover or clog the lit tool with cloth or
carton, etc. Covering or clogging it may cause a
ame.
3. The tool is not waterproof. Do not use it in
damp or wet locations. Do not expose it to rain
or snow. Do not wash it in water.
4. Do not touch the inside of the ashlight head
with tweezers, metal tools, etc.
5. Do not give the tool a shock by dropping,
striking, etc.
6. When the tool is not in use, always switch off
and remove the battery cartridge from the tool.