P
phillipscassandraSep 4, 2025
Why does my Makita Vacuum Cleaner start moving suddenly?
- GgonzalezkathleenSep 4, 2025
The ON timer reservation might be enabled, causing the robotic cleaner to start moving suddenly.
To Next PageTo Next PageWhy does my Makita Vacuum Cleaner start moving suddenly?
The ON timer reservation might be enabled, causing the robotic cleaner to start moving suddenly.
Why does my Makita DRC300 not run?
If your Makita Vacuum Cleaner is not running, it could be due to the following reasons: * The error lamp might be blinking. The cleaner will not run during an error. * The cleaner might be in the waiting mode for operation by ON timer reservation. Operations other than turning off the power and location notification are not possible in this mode.
What to do if my Makita DRC300 Vacuum Cleaner remote control does not work?
First, check if the batteries are correctly placed in the remote control. If the batteries are correctly placed, ensure the power of the robotic cleaner is turned on by pressing the start/stop button. Also, make sure that the distance between the remote control and the robotic cleaner is not too long, and that there are no obstacles blocking the signal.
Why does my Makita DRC300 continue avoidance behavior with no obstacles?
If the robotic cleaner continues to perform avoidance behavior even without obstacles or steps, the cliff sensors or LiDAR sensor might be dirty. Ensure you care for them.
Why does the time reset on my Makita Vacuum Cleaner?
If the set time on your Makita Vacuum Cleaner is frequently reset, the built-in battery may be low from not being used for a long time. Run the cleaner for more than 1 hour, or leave it in standby to recharge the battery.
Why does my Makita Vacuum Cleaner keep avoiding even when there's nothing there?
If your Makita Vacuum Cleaner is constantly performing avoidance maneuvers even when there are no obstacles, the cliff sensors or LiDAR sensor may be dirty. Clean them.
Why is my Makita Vacuum Cleaner so loud?
If your Makita Vacuum Cleaner is louder than usual, the dust box might be full, or the filter could be clogged. Dispose of the dust and clean the filter. Also, check if dust is caught in the main and side brushes, ensuring they are installed correctly.
Why doesn't the remote control work for my Makita DRC300 Vacuum Cleaner?
If your Makita Vacuum Cleaner's remote control isn't working, consider these potential causes: * The batteries in the remote control might be incorrectly placed. Check the battery orientation. * The batteries may be at the end of their life. Replace them with new ones. * The cleaner itself might be turned off. Press the start/stop button on the cleaner to turn it on. * The distance between the remote control and the cleaner might be too far. Reduce the distance and remove any obstacles.
What to do if the remote control of my Makita DRC300 Vacuum Cleaner does not work?
If the remote control for your Makita Vacuum Cleaner isn't working, first check if the batteries are correctly placed. If the batteries are old, replace them with new ones. Make sure the robotic cleaner is powered on. Also, ensure that there isn't too much distance or any obstacles between the remote control and the cleaner.
Why does my Makita DRC300 Vacuum Cleaner remote not work?
If the remote control for your Makita Vacuum Cleaner isn't working, first check that the batteries are correctly placed. If the cleaner sometimes doesn't respond, replace the batteries with new ones. Ensure the cleaner's power is on by pressing the start/stop button. Also, make sure the distance between the remote and cleaner isn't too far, and there are no obstructions.
General| Brand | Makita |
|---|---|
| Model | DRC300 |
| Category | Vacuum Cleaner |
| Language | English |
