What to do if Makita DUR191L has abnormal vibration?
If your Makita Trimmer is vibrating abnormally, it could be due to a broken nylon cord. Try tapping the nylon cutting head against the ground while it is rotating to feed the cord. If the issue persists, the drive system may not be working correctly.
Why Makita DUR191L does not reach maximum RPM?
If your Makita Trimmer does not reach maximum RPM, consider the following: * Improper battery installation: Install the battery cartridge as described in the manual. * Dropping battery power: Recharge the battery, and if that's ineffective, replace it. * Faulty drive system: Seek repair from your local authorized service center.
What to do if my Makita DUR191L Trimmer motor does not run?
If the motor of your Makita Trimmer doesn't start, possible causes include: the battery cartridge might not be installed—ensure it is properly installed. The battery may be under voltage—try recharging it, and if that doesn't work, replace the battery. If these steps don't resolve the issue, the drive system may not be working correctly.
Why does my Makita DUR191L Trimmer motor stop running after a little use?
If your Makita Trimmer motor stops shortly after starting, it could be due to a low battery charge—recharge the battery, and replace it if recharging isn't effective. Another cause might be overheating—stop using the tool and allow it to cool down.
General| Power Source | Battery |
|---|---|
| Battery Voltage | 18V |
| Motor Type | Brushless |
| Handle Type | Loop Handle |
| Type | String Trimmer |
| Line Diameter | 1.65 mm |
Explains symbols and provides general safety precautions for tool use.
Precautions for safe use of electrical power tools and avoiding electric shock.
Essential safety instructions to prevent electric shock, fire, and serious injury.
Guidelines for operator alertness, use of PPE, and preventing accidental starts.
Details essential protective gear like helmets, goggles, gloves, and ear protection.
Precautions related to electrical shock, battery handling, and charging.
Explains kickback phenomena and provides methods to avoid it.
Guidelines for proper tool positioning, control, and avoiding kickback injuries.
Crucial safety warnings and precautions for handling and using battery cartridges.
Common problems, their probable causes, and recommended remedies.
To Next Page
