Makita HM1100C User Manual

INSTRUCTION MANUAL
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
www.makitatools.com
Demolition Hammer
MODEL HM1100C
002875
DOUBLE
INSULATION

Makita HM1100C Specifications

General

Power Source	Corded Electric
Input Power	1100 W
Impact Energy	11.3 J
Tool Length	479 mm (18-7/8")
Type	Demolition Hammer
Motor Type	Brushed
Voltage	220 - 240 V
Power	1100 W

Summary

Specifications

General Safety Rules

Specific Safety Rules

Symbols

Functional Description

Switch Action

Describes how to operate the tool's switch lever for starting and stopping.

Speed Change

Explains how to adjust the blows per minute using the adjusting dial.

Assembly

Side Handle (Auxiliary Handle)

Instructions for adjusting the position of the side handle for better control.

Installing or Removing the Bit

Steps for safely attaching and detaching bits to the tool holder.

Operation

Bit Angle

How to set the angle of the bit for different demolition tasks.

Chipping/Scaling/Demolition

Guidance on performing chipping, scaling, and demolition tasks with the tool.

Maintenance

Replacing Carbon Brushes

Procedure for replacing worn carbon brushes to ensure motor function.

Lubrication

Information on the tool's lubrication system and relubrication intervals.

Accessories

Factory Service Centers

Makita Limited One Year Warranty

Warranty Policy

Details the terms and conditions of the one-year limited warranty.