Makita HP457D User Manual

4 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: HP347D HP457D
Drilling
capacities
Masonry 10 mm 13 mm
Steel 10 mm 13 mm
Wood 25 mm 36 mm
Fastening
capacities
Wood screw 5.1 mm x 63 mm 6 mm x 75 mm
Machine screw M6
No load speed High (2) 0 - 1,400 min
-1
Low (1) 0 - 400 min
-1
Blows per
minute
High (2) 0 - 21,000 min
-1
Low (1) 0 - 6,000 min
-1
Overall length North/South America 216 mm 246 mm
Other countries 216 mm 239 mm
Rated voltage D.C. 14.4 V D.C. 18 V
Net weight 1.4 kg 1.7 kg
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsmaydi󰀨erfromcountrytocountry.
• Weight,withbatterycartridge,accordingtoEPTA-Procedure01/2014
Applicable battery cartridge and charger
Battery cartridge D.C.14.4 V Model BL1415G / BL1420G
D.C.18 V Model BL1815G / BL1820G
Charger DC18WA / DC18WB
• Someofthebatterycartridgesandchargerslistedabovemaynotbeavailabledependingonyourregionof
residence.
WARNING: Only use the battery cartridges and chargers listed above.Useofanyotherbatterycartridges
andchargersmaycauseinjuryand/orre.
Symbols
Thefollowingsshowthesymbolswhichmaybeused
fortheequipment.Besurethatyouunderstandtheir
meaningbeforeuse.
Read instruction manual.
Ni-MH
Li-ion
OnlyforEUcountries
Duetothepresenceofhazardouscom-
ponentsintheequipment,wasteelectrical
andelectronicequipment,accumulators
andbatteriesmayhaveanegativeimpact
on the environment and human health.
Donotdisposeofelectricalandelectronic
appliancesorbatterieswithhousehold
waste!
InaccordancewiththeEuropeanDirective
onwasteelectricalandelectronicequip-
mentandonaccumulatorsandbatteries
andwasteaccumulatorsandbatteries,
as well as their adaptation to national law,
wasteelectricalequipment,batteriesand
accumulatorsshouldbestoredseparately
and delivered to a separate collection point
formunicipalwaste,operatinginaccor-
dance with the regulations on environmen-
tal protection.
Thisisindicatedbythesymbolofthe
crossed-outwheeledbinplacedonthe
equipment.

Makita HP457D Specifications

General

Voltage	18V
Chuck Capacity	13 mm
Weight	1.7 kg
Power Source	Cordless
Max Drilling Capacity in Steel	13 mm
Max Drilling Capacity in Wood	36 mm
Max Drilling Capacity in Masonry	13 mm
Torque Settings	16 + Drill
Max Fastening Torque (Hard)	42 Nm
Type	Combi Drill
No Load Speed	0-400 / 0-1, 400 RPM
Impact Rate	0 - 6000 / 0 - 21000 ipm