To Next PageTo Next Page
Need help?Do you have a question about the Makita HP457DWE10 and is the answer not in the manual?
General| Number of gears | 2 |
|---|---|
| Torque settings | 16 |
| Chuck capacity (min) | 1.5 mm |
| Sound pressure level | 81 dB |
| Idle speed (1st gear) | 400 RPM |
| Idle speed (2nd gear) | 1400 RPM |
| Impact rate (low speed) | 6000 bpm |
| Sound level uncertainty | 3 dB |
| Impact rate (high speed) | 21000 bpm |
| Drilling diameter in wood (max) | 36 mm |
| Vibration level (metal drilling) | 2.5 m/s² |
| Maximum torque (hard applications) | 42 N⋅m |
| Maximum torque (soft applications) | 24 N⋅m |
| Drilling diameter in concrete (max) | 13 mm |
| Vibration level (concrete drilling) | 7 m/s² |
| Soft grip | Yes |
| Product design | Pistol grip drill |
| Product color | Black, Blue |
| Uncertainty K | 1.5 m/s² |
| Number of batteries included | 2 pc(s) |
| Power source | Battery |
| Battery voltage | 18 V |
| Battery capacity | 1.3 Ah |
Weight and Dimensions| Depth | 239 mm |
|---|---|
| Width | 83 mm |
| Height | 240 mm |
| Weight | 1700 g |
Lists compatible battery cartridges and chargers for the models.
Describes tool purpose and details noise emission levels for models.
Provides vibration emission values for HP347D and HP457D models.
General safety guidelines for operation and using long drill bits.
Covers safe handling, storage, and disposal of battery cartridges.
Provides advice on charging and storing batteries for optimal lifespan.
Step-by-step guide on how to insert and remove the battery.
Explains switch trigger, reversing switch, and speed change functions.
Explains the tool's protection features against overload and heat.
Guides on selecting drilling, hammer drilling, or screwdriving modes.
Explains how to adjust the fastening torque in 16 levels for different applications.
Instructions for performing screwdriving and hammer drilling tasks.
Tips for drilling holes in wood and metal safely and efficiently.
Lists recommended accessories and provides tool maintenance guidelines.
